» Bambi Max Guide Rod & Bolt Changed

Bambi Max Guide Rod & Bolt Changed

May 19 2016
Product: Bambi Bucket
Models: Bambi Max
Subject: Bambi Max Guide Rod & Bolt Changed

Background:

This bulletin is an update of a bulletin previously issued on September 16, 2015.  SEI has been made aware of two incidences of guide rods failing on 25” Bambi Max valves.  In both cases, the failure occurred at the interface between the guide rod and the sheave bar.  Both failures are considered to be the result of impact but the exact details are still unknown.

Recommendations:

SEI is revising the guide rods used on 16” and 25” Bambi Max valves.  The new guide rods will feature shorter threaded holes to improve strength at the location of stress concentrations.  The new 16” guide rods will require shorter bolts on the top and bottom plates to be properly installed in the valve.  The new bolts will replace 000391 (3/8-16 x 1” bolt).
 
000231 (16” Valve Guide Rod) will use 012339 (3/8-16 x 7/8” bolt).
000232 (25” Valve Guide Rod) will continue to use 000391 (3/8-16 x 1” bolt).
 
The smaller bolts can be used with the older guide rods as well as the new ones.  Existing guide rods are not considered to have a high risk of failure and do not need to be replaced on existing buckets.
 

  Download PDF version

 

May 19 2016